| PART |
Description |
Maker |
| LV4912GP LV4912GP11 |
Monaural Class D Audio Power Amplifier, BTL 2.0 W
Class-D Audio Power Amplifier BTL 2W×1ch
|
ON Semiconductor
Sanyo Semicon Device
|
| TDA7057A TDA7057AQ TDA7057Q |
2 x 8 W stereo BTL audio output amplifier with DC volume control 2 CHANNEL(S), VOLUME CONTROL CIRCUIT, PZFM13
50 AMP LATCHING POWER RELAY
2 x 3 W stereo BTL audio output amplifier
|
NXP Semiconductors N.V.
PHILIPS[Philips Semiconductors]
|
| AN7164 |
From old datasheet system
Single Audio Amplifier
30 W BTL audio power amplifier
|
PANASONIC[Panasonic Semiconductor]
|
| NTE1850 |
Integrated Circuit Dual 12W/Channel Audio Power Amplifier
|
NTE[NTE Electronics]
|
| LA4460N LA4461N |
12W AF Power Amplifier for Car Radio, Car Stereo
From old datasheet system
AUDIO AMPLIFIER,DUAL,SIP,10PIN,PLASTIC
|
SANYO[Sanyo Semicon Device]
Sanyo Semiconductor Corp
|
| TA7280P TA7281P |
5.8W Dual Audio Power Amplifier. 22W BTL Audio Power Amplifier.
|
TOSHIBA
|
| BUS-855926L BUS-855947 BUS-855935L BUS-855935Q BUS |
DATACOM, MIL-STD-1553 DATA BUS TRANSCEIVER, DIP24
100mW stereo headphone amplifier with standby mode 通信集成电路
MPEG 2.5 layer III (MP3) audio decoder 通信集成电路
300mW at 3.3V supply audio power amplifier with standy mode active low 通信集成电路
80V-80W DMOS audio amplifier with mute/st-by 通信集成电路
12W audio amplifier 通信集成电路
25W 25W stereo class-D amplifier 50W mono in BTL 通信集成电路
STEREO AUDIO AMPLIFIER 通信集成电路
Output rail to rail 1W audio power amplifier with standby mode 通信集成电路
8-bit OTP/EPROM/FASTROM MCUs with A/D converter, safe reset, auto-reload timer and EEPROM 通信集成电路
1.2W differential input/output audio power amplifier with selectable standby 通信集成电路
6 6W stereo amplifier
2 X 2W stereo audio amplifier
2W mono amplifier
3.3V range 8-bit MCU for automotive with 16/32 Kbyte Flash or 16 Kbyte ROM, 10-bit ADC, 4 timers, SPI and SCI interfaces
8-bit MCUs with A/D converter, two timers, oscillator safeguard & safe reset
70V-60W DMOS audio amplifier with mute/standby
Pop-free 100mW stereo headphone amplifier
16-bit MCU with MAC unit, 832 Kbyte Flash memory and 68 Kbyte RAM
ST10F272B-E Final Data
Digital signal processing IC for speech and audio applications
12 12W stereo amplifier with muting
Tone control and surround digitally controlled audio processor
Telecommunication IC
8-bit MCU for automotive with electric-motor control, ADC, 16-bit timers, SPI interface
10W car radio audio amplifier
5W 5W AMPLIFIER WITH DC VOLUME CONTROL
TWO BANDS DIGITALLY CONTROLLED AUDIO PROCESSOR WITH BASS ALC SURROUND
5W audio amplifier with muting
16-bit MCU with 512 Kbyte Flash memory and 36 Kbyte RAM
Sound Terminal" 2-channel microless high-efficiency digital audio system
8-bit MCU for automotive, 3.8 to 5.5V operating range with 8 to 32 Kbyte Flash/ROM, 10-bit ADC, 4 timers, SPI, SCI
Rail-to-rail output 1W audio power amplifier with standby mode active low
8-bit MCU for automotive with 32 to 60 Kbyte Flash/ROM, ADC, 5 timers, SPI, SCI, I2C interface
5-V, 2-A, 2.1-channel high-efficiency digital audio system with QSound QHD®
32-bit Power Architecture" based MCU for automotive powertrain applications
14W 14W stereo amplifier with mute & stby
6 2-Ch. multistandard audio decoder
|
DATA DEVICE CORP
TE Connectivity, Ltd.
Motorola Mobility Holdings, Inc.
Bourns, Inc.
Advanced Linear Devices, Inc.
XP Power, Ltd.
Microchip Technology, Inc.
Future Technology Devices International, Ltd.
|
| LA4466 LA4465 |
BTL-OCL 12W AF Power Amp For Car Stereo Use
|
SANYO[Sanyo Semicon Device]
|
| LA4625-E |
2-channel 13.5W BTL Audio Power Amplifier
|
ON Semiconductor
|
| LA4625 LA462508 LA462510 |
2-channel 13.5W BTL Audio Power Amplifier
|
Sanyo Semicon Device
|
| LA47536 |
Four-Channel 45 W BTL Car Audio Power Amplifier
|
Sanyo Semicon Device
|
